SSH Reference Manual

"<1> Checkallocatesegment err <2>"
<2> error code
• CAUSE: STN could not allocate its internal buffer pool in the backup process due to an error condition.
• EFFECT: STN runs without a backup. STN will automatically restart the backup process.
• RECOVERY: If backup operation is required, use the STNCOM command BACKUPCPU to select another
backup CPU.
zstn-evt-backup-loop value is 11
"<1> Backup creation loop - BACKUPCPU NONE assumed"
• CAUSE: The backup process repeatedly failed. Other EMS events will give additional information.
• EFFECT: STN runs without a backup until a STNCOM command BACKUPCPU is entered.
• RECOVERY: Correct the problem causing the backup failures, then use the STNCOM BACKUPCPU
command.
zstn-evt-ckpt-fe value is 12
"<1> Backup checkpoint16file err <2>"
<2> error code
• CAUSE: Unable to communicate with backup process due to an error condition.
• EFFECT: The backup is stopped. STN will automatically restart the backup process.
• RECOVERY: None; informational only.
zstn-evt-ckopen-err value is 13
"<1> Checkopen err <2> file <3>"
<2> error code
<3> file name
• CAUSE: An error occurred during backup checkopen of a file.
• EFFECT: The backup is stopped. STN will automatically restart the backup process.
• RECOVERY: None; informational only.
zstn-evt-trace-start value is 14
"<1> Trace started to file <2> size <3>"
<2> trace file name
<3> size of the trace file
• CAUSE: An STN trace was started.
• EFFECT: None.
• RECOVERY: None; informational only.
294 • STN Reference HP NonStop SSH Reference Manual