SSH Reference Manual

zstn-evt-trace-stop value is 15
"<1> Trace stopped"
• CAUSE: An STN trace was stopped.
• EFFECT: None.
• RECOVERY: The binary trace file may now be forwarded to Support, or may be formatted using the GTRED
program.
zstn-evt-trace-segment value is 16
"<1> Trace not started to <2> size <3> allocatesegment error <4>"
<2> extended segment file name
<3> size of the file
<4> error code
• CAUSE: An error was encountered when allocating an extended segment file.
• EFFECT: Tracing is not enabled.
• RECOVERY: Correct any errors in the trace filename, or select a disk with more available space, then retry the
TRACE command.
zstn-evt-takeover value is 18
"<1> Backup process takeover due to: <2>"
<2> reason of the takeover, such as primary cpu failure, etc.
• CAUSE: STN backup process takeover.
• EFFECT: Backup process resumes STN operation. Any sessions active in the previous primary process are
lost. New sessions will be accepted immediately. Depending on backup CPU availability, a new backup
process is automatically started.
• RECOVERY: If the reason for the backup takeover, such as primary CPU failure, is understood, then no action
is required. Otherwise, contact Support.
zstn-evt-trace-error value is 19
"<1> Trace not started to <2> size <3> error <4> / <5>"
<2> trace file name
<3> trace file size
<4> error code
<5> detail error
• CAUSE: An unusual error was encountered while opening a trace file.
• EFFECT: Tracing is not enabled.
• RECOVERY: Contact Support. Retry the TRACE command.
HP NonStop SSH Reference Manual STN Reference • 295