SSH Reference Manual

STN17 Input error; proper syntax is group.user
Improper response to STN15 prompt.
STN18 Unknown userid or incorrect password; please wait ...
This follows the response to the STN16 prompt. After a delay to discourage hackers and automated logon attacks, the
STN15 prompt is repeated. After three STN18 consecutive logon failures, the session is terminated.
STN19 Add Window failed for Dynamic Service
User entered a dynamic service name in response to the menu, but a new dynamic window could not be added, usually
due to a resource shortage. Notify Support.
STN20 Starting Dynamic Service application
STN is starting the application for the requested dynamic service.
STN21 Dynamic Service Application Creation Error
STN was not able to start the application for the requested dynamic service. An additional message STN22-STN34 is
displayed with error details from PROCESS_CREATE_.
STN22 file error <fe> on PROGRAM file
PROCESS_CREATE_ error 1: File system status <fe> on PROGRAM file.
STN23 file error <fe> on LIB file
PROCESS_CREATE_ error 3: File system status <fe> on LIB file.
STN24 file error <fe> on SWAP file
PROCESS_CREATE_ error 5 or 6: File system status <fe> on SWAP file.
STN25 file error <fe> on HOME TERM file
PROCESS_CREATE_ error 8 or 9: File system status <fe> on HOME file.
STN26 CPU(s) configured for this service are down
PROCESS_CREATE_ error 10: none of the CPUs for this service are running.
STN27 file error <fe> on process name
PROCESS_CREATE_ error 11: File system status <fe> on HOME file.
HP NonStop SSH Reference Manual STN Reference • 299