SSH Reference Manual

STN39 Session terminated - application request (control 12) <time>
The application has disconnected the session via control 12. This is normal termination for some applications, like TACL
logoff.
After session termination, 6530 terminals will always be left in conversational (ITI) mode, and the terminal display is
erased.
STN39 Session terminated - application closed terminal <time>
The application has closed the window and AUTODEL_WAIT seconds have elapsed. This is normal termination for
some applications, for instance TACL exit. See AUTODEL_WAIT for details.
After session termination, 6530 terminals will always be left in conversational (ITI) mode, and the terminal display is
erased.
STN41 The requested dynamic service application was started, but did not connect to this window
within 60 seconds. The application, and this session are being stopped.
This generally indicates a programming error in the application for the dynamic service. Contact the system
administrator.
STN42 open (for startup message) error on process <p> fe <fe>
For dynamic windows, STN tried to open the newly created application process <p> to pass the startup message, but the
open was rejected with file system error <fe>. Contact the system administrator.
STN43 write (for startup message) error on process <p> fe <fe>
For dynamic windows, STN opened the newly created application process <p> to pass the startup message, but the write
was rejected with file system error <fe>. Contact the system administrator.
STN44 Application <$name> has connected to this window
STN has detected an open from the application program. The next message will be from the application (e.g. TACL
prompt). <$name> is the application process name.
STN46 Secure SSH session: <SSH info>
This is an informational message to emphasize that the session is secure. Encryption details are provided.
STN48 <window-or-service>
This is an informational message to echo the response to the menu prompt. This is especially useful when the service
name is automatically entered by the terminal emulator.
STN50 Negotiation timeout - check Line Mode setting in terminal emulator. Session terminated.
Telnet IAC negotiations did not complete within 20 seconds.
HP NonStop SSH Reference Manual STN Reference • 301