SSH Reference Manual

STN51 Workstation IP address not in range for requested service
The IP address of the remote workstation is not defined in the IPRANGE, or the IPRANGE is not defined.
STN54 session timed out waiting for user logon response
A session connected to a SERVICE with LOGON REQ, but the user did not respond to the logon prompt.
STN57 This 6530 emulator does not support required WSINFO
See STNCOM command WSINFO.
STN58 WSINFO address does not match network address
See STNCOM command WSINFO.
STN59 Input discarded
For an SSH session with no read active (TACL PAUSE-d etc), a very large amount of keyboard input was received.
Further input is discarded.
STN70 No existing window available for resilient service, window <win> added
A resilient service was requested, but no previously created windows were available. STN creates a new window and
starts the application.
STN70 Reconnecting to resilient window <win> Last access: <date> <time>
Connection to a resilient service where an existing window from a previous session has been reconnected to the current
session.
STN70 application <$pname | pid | cpu,pin> <program-filename>
When reconnecting to a resilient window, one line is displayed (up to 12 lines) for each process which had the window
open. For Guardian processes, the program object file name and $pname or cpu,pin is edited; for Posix processes, the pid
is displayed in hex.
STN70 Additional openers not listed
When reconnecting to a resilient window, one line is displayed (up to 12 lines) for each process which had the window
open. For Guardian processes, the program object file name and $pname or cpu,pin is listed; for Posix processes, the pid
is displayed in hex. This message is displayed if there were more than 12 processes and the remainder had been
discarded.
STN70 no application active on this window
When reconnecting to a resilient window, no application programs were open. The window is effectively unusable.
302 • STN Reference HP NonStop SSH Reference Manual