SSH Reference Manual

LOG LEVEL EVENT TEXT / Description Variable Parts
<uint3>: Value of second highest byte of GSSAPI major status
<uint4>: GSSAPI major status
<uint5>: GSSAPI minor status
<uint6>: Highest byte of minor status
<uint7>: Value of second highest byte of GSSAPI minor status
<uint8>: Value of lowest 16Bit of GSSAPI minor status
10 <str1>: Error (GSS_C_GSS_CODE): <str2>
<str1>: Session Name
<str2>: GSSAPI error description for major status
10 <str1>: Error (GSS_C_MECH_CODE): <str2>
<str1>: Session Name
<str2>: GSSAPI error description for minor status
10 <str1>: received invalid request code
<str1>: Session Name
10 <str1>: received invalid request: <str2>
<str1>: Session Name
<str2>: Exception text
10 <str1>: received invalid request: unknown exception
<str1>: Session Name
10 Failed to obtain credentials for host service. Check your Kerberos installation.
10 GSS Error (major status): <uint1> [<uint2>/<uint3>/<uint4>] (<str1>)
<uint1>: GSSAPI major status
<uint2>: Value of highest byte of GSSAPI major status
<uint3>: Value of second highest byte of GSSAPI major status
<uint4>: GSSAPI major status
<str1>: GSSAPI error description for major status
10 Kerberos Error (minor status): <uint1> [<uint2>/<uint3>/<uint4>] (<str1>)
<uint1>: GSSAPI minor status
<uint2>: Highest byte of minor status
<uint3>: Value of second highest byte of GSSAPI minor status
<uint4>: Value of lowest 16Bit of GSSAPI minor status
<str1>: GSSAPI error description for minor status
10 Value '<chr1>' for GUARDIANATTRIBUTESEPARATOR not acceptable, using default '<chr2>'.
<chr1>: Separator
<chr2>: Comma
10 Value <str1> for SFTPEDITLINEMODE not a supported value.
<str1>: Value configured for parameter SFTPEDITLINEMODE
10 Value <int1> for SFTPEDITTABSIZE not acceptable, <str1>.
<int1>: Number of spaces replacing a TAB
<str1>: Error description
10 Value <str1> for SFTPEXCLUSIONMODEREAD not a supported value.
344 • Appendix HP NonStop SSH Reference Manual