SSH Reference Manual

[file ] SSHCTLAUDIT <FALSE>
[def ] SSHKEEPALIVETIME <60>
[def ] STOREDPASSWORDSONLY <FALSE>
[file ] STRICTHOSTKEYCHECKING <FALSE>
[run ] SUBNET <$ZTC1>
[def ] SUPPRESSCOMMENTINSSHVERSION <FALSE>
[def ] TCPIPHOSTFILE <*>
[def ] TCPIPNODEFILE <*>
[def ] TCPIPRESOLVERNAME <*>
$SSH01|20Jan14 15:34:01.55|10|CRYPTOPP version
T9999H06_12Dec2013_comForte_CRYPTOPP_0028
$SSH01|20Jan14 15:34:01.57|20|TCP/IP process is $ZTC1
$SSH01|20Jan14 15:34:05.35|20|Converted INTERFACE: 0.0.0.0
$SSH01|20Jan14 15:34:05.35|20|Converted INTERFACEOUT: 0.0.0.0
$SSH01|20Jan14 15:34:05.36|20|Define =TCPIP^PROCESS^NAME did not exist: Parameter
SUBNET was evaluated and define will be added.
$SSH01|20Jan14 15:34:05.36|20|DEFINE =TCPIP^PROCESS^NAME was set to <\BWNS02.$ZTC1>
$SSH01|20Jan14 15:34:05.37|20|SSH config database \BWNS02.$QAHPSSH.T0801ABK.SSHDBK is
not audited. A backup should be made after every config change.
$SSH01|20Jan14 15:34:05.39|10|SSH config database \BWNS02.$QAHPSSH.T0801ABK.SSHDBK
opened.
$SSH01|20Jan14 15:34:05.79|20|DEFINE =CIP^COMPAT^ERROR was set to
<\BWNS02.$QAHPSSH.T0801ABK.SUPPRESS>
$SSH01|20Jan14 15:34:05.79|20|DEFINE =SSH2^PROCESS^NAME was set to <\BWNS02.$SSH01>
$SSH01|20Jan14 15:34:05.80|10|Initializing SSH2 ADMIN run mode.
$SSH01|20Jan14 15:34:05.80|10|Initializing SSH2 CLIENT run mode.
$SSH01|20Jan14 15:34:05.80|10|Initializing SSH2 DAEMON run mode.
$SSH01|20Jan14 15:34:05.81|10|Loading private key from
\BWNS02.$QAHPSSH.T0801ABK.HOSTKEY
$SSH01|20Jan14 15:34:05.83|30|Host key algorithm: ssh-dss
$SSH01|20Jan14 15:34:05.84|30|Host key bits: 1024
$SSH01|20Jan14 15:34:05.84|30|Host key MD5 fingerprint:
26:ba:c4:e2:a7:1e:81:68:6c:18:10:49:96:50:04:03
$SSH01|20Jan14 15:34:05.84|30|Host key Bubble-Babble: xotam-patys-kupek-mogiv-tozul-
dihez-sevag-tikel-cebok-tityd-vyxux
$SSH01|20Jan14 15:34:05.86|10|SSH2 Server listening on process $ZTC1,
interface0.0.0.0, port 12229
Secure Shell Access to the NonStop™ Server
Note: This functionality is not enabled if you purchased a license restricted to file transfer ("HP NonStop SSH –
SecureFTP" or "comForte SecurFTP/SSH").
SSH2 allows remote SSH clients to establish fully functional OSS shell sessions. SSH2 will also support the allocation
of pseudo terminals (PTYs), which allow the remote users to execute full screen applications, such as vi or Emacs.
To Open an OSS Shell Using a Remote SSH Client
Note: This functionality requires OSS to be installed and running on your system.
After the STN and SSH2 processes have started successfully, you can now connect using an SSH client on a remote
system. In the SSH command, you have to specify the Guardian userid and the IP address or host name that SSH2 is
listening on:
m.horst@np-dev02:~> ssh comf.mh@10.0.0.199
The authenticity of host '10.0.0.199 (10.0.0.199)' can't be established.
DSA key fingerprint is 26:b8:77:fb:2f:22:81:3b:f6:44:4f:19:66:67:9a:be.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.0.0.199' (DSA) to the list of known hosts.
comf.mh@10.0.0.199's password:
$ ls
a1000 emsacstm secret t10mio trace2 zrand1m
HP NonStop SSH Reference Manual Installation & Quick Start • 39