SSH Reference Manual

Default

If omitted, FILEBURSTSUPPRESSION is set to FALSE.

Example

FILEBURSTSUPPRESSION TRUE

See also

BURSTSUPPRESSION, BURSTSUPPRESSIONEXPIRATIONTIME, BURSTSUPPRESSIONMAXLOGLEVEL

FULLSSHCOMACCESSGROUP<j>

This parameter set allows granting administrative SSHCOM command privileges to groups rather than just than

super.super. Admin groups are defined via the parameter set FULLSSHCOMACCESSGROUP<j> where <j> is a

number between 1 and 99.

Parameter Syntax

FULLSSHCOMACCESSGROUP<j> <group>

Arguments

<group>

A Guardian group name. All members of the group will have full SSHCOM access.

Default

By default, none of the parameters are set, i.e. only users configured in the Safeguard OBJECTTYPE USER record (if

such exists) and super.super (unless explicitly denied in OBJECTTYPE USER) can access privileged commands.

Example

FULLSSHCOMACCESSGROUP1 admin

FULLSSHCOMACCESSGROUP2 super

Considerations

• Some of the privileged commands in SSHCOM are critical to the security of the system. Therefore granting

access to other user accounts than super.super must be carefully considered.

• The parameters must be set contiguously, i.e. if one parameter FULLSSHCOMACCESSGROUP<k> is not

defined the checking of FULLSSHCOMACCESSGROUP<i> parameters stops.

• This parameter set is disabled if a thawed OBJECTTYPE USER record exists in Safeguard, i.e. any

FULLSSHCOMACCESSGROUP<j> parameter configuration is ignored in this case.