Storage Management Foundation User's Guide

Pool Management
HP NonStop Storage Management Foundation User's Guide—523562-008
6-9
Example
Using the above information for the VDP catalog, the file will appear as:
SMFIXUP USECATALOG $VDP.ZSMSCAT.ANT
$DISK3.ZYS00000.A0000000
SMFIXUP USECATALOG $VDP.ZSMSCAT.DEPOBJ
$DISK3.ZYS00000.A000000B
SMFIXUP USECATALOG $VDP.ZSMSCAT.IDENTITY
$DISK3.ZYS00000.A000000A
SMFIXUP USECATALOG $VDP.ZSMSCAT.PENDOPS
$DISK3.ZYS00000.A0000001
SMFIXUP USECATALOG $VDP.ZSMSCAT.VERSION
$DISK3.ZYS00000.A000000C
15. Stop the VDP:
> SCF STOP DISK $VDP
16. Restart the VDP:
> SCF START DISK $VDP
If you have more than 2 physical volumes in the pool, you can use the following
procedure to move files from one physical volume:
Identify the logical files on the physical volume via SMFIXUP. Because the files are
evenly spread across all the volumes assigned to a SMF storage pool, you need to
identify which files are located on the volume that is going to be removed from the
storage pool. Use the TACL macro (SMRECOV) within TIM to select which files are
located on which volume.