Subsystem Control Point (SCP) Management Programming Manual

Event Messages
Subsystem Control Point (SCP) Management Programming Manual—520619-001
6-24
29 ZSCP-EVT-SCPTRACE-ERR
ZSCP-TKN-ERRCODE
contains the error code returned by the file system.
Cause. The OPEN or FILE_OPEN_ procedure returned an error when SCP attempted
to open its backup process.
Effect. If the backup process exists, it is stopped and restarted. If there is no backup
process, one is started.
Recovery. The SCP process should have a backup process. If the problem recurs,
obtain this information (if available) before calling a Compaq representative: the
SAVEABEND file, the SCF log, the SCP trace file, and the CPU dump.
29 ZSCP-EVT-SCPTRACE-ERR
The SCP process issues this noncritical event message when a problem occurs with
tracing (initiated with a TRACE command).
ZSCP-TKN-ERRCODE
contains the error code returned by the SPI procedure:
For more information on these errors, see the Distributed Systems Management
(DSM) Manual.
Tokens in Event Message
ZSCP-TKN-ERRCODE <1> token-type ZSPI-TYP-INT.
Message Text
SCPTRACE error (<1>); trace suspended
ZSPI-ERR-INVBUF Invalid buffer format
ZSPI-ERR-ILLPARM Illegal parameter value
ZSPI-ERR-MISPARM Missing parameter
ZSPI-ERR-BADADDR Illegal parameter address
ZSPI-ERR-NOSPACE Buffer full
ZSPI-ERR-XSUMERR Invalid checksum
ZSPI-ERR-INTERR Internal error
ZSPI-ERR-MISTKN Token not found
ZSPI-ERR-ILLTKN Illegal token code or map
ZSPI-ERR-BADSSID Invalid subsystem ID
ZSPI-ERR-NOTIMP Operation not supported
ZSPI-ERR-NOSTACK Insufficient stack space