Subsystem Control Point (SCP) Management Programming Manual

Event Messages
Subsystem Control Point (SCP) Management Programming Manual—520619-001
6-26
31 ZSCP-EVT-PROC-DOWN
31 ZSCP-EVT-PROC-DOWN
The primary SCP process has stopped in a sufficiently orderly manner to be able to issue
this event before stopping.
ZSCP-TKN-CAUSE-PROC-DOWN
specifies the reason that the primary process was stopped. The possible values are:
Cause. The primary SCP process stopped in a sufficiently orderly manner to issue this
event before stopping. ZSCP-TKN-CAUSE-PROC-DOWN indicates the cause.
Effect. The SCP process no longer exists.
Recovery. Restart an SCP process.
32 ZSCP-EVT-BKUP-DOWN
A backup SCP process stopped.
Cause. A backup SCP process stopped in response to a STOP, PROCESS_STOP_, or
ABEND procedure call.
Effect. The backup process no longer exists.
Recovery. Informational message only; no corrective action is needed.
Tokens in Event Message
ZSCP-TKN-CAUSE-PROC-DOWN <1> token-type ZSPI-TYP-ENUM.
Message Text
Process terminated because <1>
ZSCP-VAL-AUTOSTOP-EXPIRE The AUTOSTOP startup parameter value
expired, and the primary process stopped itself.
ZSCP-VAL-STOP A STOP command issued by an operator or a
management application stopped the primary
process.
Tokens in Event Message
(contains only standard event-message tokens)
Message Text
Backup process terminated