Subsystem Control Point (SCP) Management Programming Manual

Event Messages
Subsystem Control Point (SCP) Management Programming Manual—520619-001
6-31
38 ZSCP-EVT-BAD-PUTMEMORY
SERV-ERR on page A-9, and the description of ZCOM-ERR-FS-ERR in the SPI
Common Extensions Manual.
Recovery. Check the software versions for incompatibilities and make sure the request
contains the correct name of the subsystem manager process.
38 ZSCP-EVT-BAD-PUTMEMORY
The SCP process cannot allocate memory for processing a request because of
insufficient buffer space.
ZSCP-TKN-PUTMEM-PROB
contains the message indicating whether the specified piece of dynamic memory is
allocated. Possible values are:
Cause. Not enough buffer space is available, so the SCP process cannot allocate
memory for processing a request.
Effect. SCP generates this event, then abends. The message, with header PUTMEMORY
problem, is generated in the event log.
Recovery. Restart the SCP process.
39 ZSCP-EVT-PFS-FULL
SCP cannot open the subsystem because of insufficient space in the Program File
Segment (PFS).
Cause. SCP cannot open a request for a subsystem due to insufficient space in the
Program File Segment (PFS).
Effect. SCP displays the error message and abends the SCF command that is expected
to finish.
Tokens in Event Message
ZSCP-TKN-PUTMEM-PROB <1> token-type ZSPI-TYP-ENUM
Message Text
Bad PUTMEMORY call: <1>
Status = 1 allocated memory but does not contain expected data
Status = 2 memory is not allocated
Tokens in Event Message
(contains only standard event-message tokens)
Message Text
Device name had File Sys Err with SCP. FS error: 31