Subsystem Control Point (SCP) Management Programming Manual

Errors

Subsystem Control Point (SCP) Management Programming Manual—520619-001

A-8

–993 ZCOM-ERR-NO-TLE

A command message containing ZCOM-TKN-CMD-TIMEOUT could not be processed

because no time-list element (TLE) is available.

Cause. A TLE is used to measure when a specified interval of time has expired. The

command modifier ZCOM-TKN-CMD-TIMEOUT specifies that if a command message

has not completed within a certain time interval, it should be canceled. If no TLE is

available, the interval of time cannot be measured. The command message can be

processed if a TLE becomes available. This is an operating system resource problem.

Effect. The SCP process cannot process the command message and rejects it.

Recovery. Reissue the command. If this error begins to occur frequently, notify the

system manager.

–994 ZCOM-ERR-BAD-TIMEOUT

A command message containing the command modifier ZCOM-TKN-CMD-TIMEOUT

could not be processed because the Guardian SIGNALTIMEOUT procedure call failed.

Cause. The SIGNALTIMEOUT procedure could not be executed. This is an operating

system problem.

Effect. The command is not processed.

Recovery. If this error recurs, contact your Compaq representative.

ZSPI-TKN-ERRLIST

ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR

ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING

ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-ENUM

ZSPI-TKN-ENDLIST

Corresponding SCF Error Message