Subsystem Control Point (SCP) Management Programming Manual

Errors
Subsystem Control Point (SCP) Management Programming Manual—520619-001
A-11
–999 ZCOM-ERR-MGRNAME-INV
Recovery. Try reissuing the command. If the problem persists with a NonStop Kernel
subsystem, contact your Compaq representative.
–999 ZCOM-ERR-MGRNAME-INV
The process name specified by ZSPI-TKN-MANAGER or ZCOM-TKN-XMGR was
invalid, or the process does not exist.
Cause. The process name specified in ZSPI-TKN-MANAGER was too long or in an
invalid format, or the process does not exist.
Effect. The command is rejected, and this error is returned in the response.
Recovery. Check if the manager process exists. If so, correct the manager process name
and reissue the command. If not, restart the manager process and reissue the command.
ZSCP Errors
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-ENUM
ZSPI-TKN-ENDLIST
Error Text
Manager name is invalid
Table A-3. ZSCP Errors, Listed by Number
Number Name
1 ZSCP-ERR-OBJ-ACTIVE
2 ZSCP-ERR-NO-BKUP
3 ZSCP-ERR-NO-INFO
4 ZSCP-ERR-TKN-VAL-REQ
5 ZSCP-ERR-BKUP-MODIF-NOT-ALLOW
6 ZSCP-ERR-TRACE-MOD-REQ
Table A-4. ZSCP Errors, Listed by Name
Name Number
ZSCP-ERR-BKUP-MODIF-NOT-ALLOW 5
ZSCP-ERR-NO-BKUP 2
ZSCP-ERR-NO-INFO 3