Subsystem Control Point (SCP) Management Programming Manual

Errors
Subsystem Control Point (SCP) Management Programming Manual—520619-001
A-36
–985 ZTRC-ERR-COLL-FAIL
.Z-OFFSET
specifies the byte offset (within the structured token) of the fields containing the
incompatible values.
Cause. This error is generated if the request tries to modify the record size to a value
less than 16 or greater than 4050 bytes.
Effect. The request is rejected.
Recovery. Reissue the request after correcting the modifier value or omitting one of the
modifiers from the request.
–985 ZTRC-ERR-COLL-FAIL
The tracing process could not communicate with the trace collector process.
ZTRC-TKN-INIT-ERR-DETAIL
contains the file-system error number.
Cause. A system procedure call, issued by the tracing process, returned a file-system
error.
Effect. The trace is stopped.
Recovery. Restart the trace. If the error recurs, contact your Compaq representative.
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR token-type ZSPI-TYP-ERROR
ZCOM-TKN-OBJTYPE token-type ZSPI-TYP-ENUM
ZCOM-TKN-OBJNAME token-type ZSPI-TYP-STRING
ZTRC-TKN-INIT-ERR-DETAIL <1> token-type ZSPI-TYP-INT
ZSPI-TKN-ENDLIST
Corresponding SCF Error Message
SCP Trace collector failed: File System error: <1>