Subsystem Control Point (SCP) Management Programming Manual

Index
Subsystem Control Point (SCP) Management Programming Manual—520619-001
Index-4
R
R
RECEIVEDEPTH startup parameter 2-6
REQID
see Requester Identification
Requester Identification (REQID) 3-5
RESETSTATS command 5-24
Response-message tokens, common 5-5
Retired definitions 4-28
RUN command
process options 2-3
starting an SCP process 2-2
startup parameters 2-4
S
SCB
see Server Control Block table 6-28
SCF
see Subsystem Control Facility
SCP
see Subsystem Control Point
SCPTC trace collector B-3
SCPTCOL trace collector B-3
SCPTRACE tracing environment B-3
Security
see Command security
Segmented responses 5-21
SEGPAGES startup parameter 2-6
Sensitive commands, defined 5-7
Server Control Block (SCB) table
table full condition 6-20
, 6-28, A-7
SSID
of SCP 4-24
ZSPI-TKN-SSID 5-3
START command 5-26
Starting an SCP process
at a high PIN 2-3
, 2-9, 2-11
overview 2-2
process options 2-3
selecting a log file 2-11
startup parameters 2-4
using NEWPROCESS procedure 2-10
using PROCESS_CREATE_
procedure 2-7
using RUN command 2-2
Startup message
structure 2-10
Startup parameters 2-4
STATISTICS command 5-27
STATUS command 5-29
STOP command 5-32
Stopping an SCP process
methods 2-13
see also AUTOSTOP startup parameter
see also STOP and ABORT commands
Subsystem Control Facility (SCF)
and the $ZNET SCP process 2-2
overview as management application 1-
1
Subsystem Control Point (SCP)
abnormal termination 2-13
adds new REQID tokens 3-6
and the ZCMK definitions 3-10
buffer size 3-3
command message cancellation 3-4
command message validation 3-5
command timeout 3-6
concurrent applications supported 3-3
message queuing 3-4
message routing 3-3
nowait depth 3-4
object-file security 2-2
opening an SCP process 2-12
overview 1-1
requester identification 3-5
security validation 3-5
software version validation 3-5
starting an SCP process 2-2