Subsystem Control Point (SCP) Management Programming Manual

Index
Subsystem Control Point (SCP) Management Programming Manual—520619-001
Index-7
Z
ZCOM-TKN-NEWPROCESS-ERR 4-1
ZCOM-TKN-NEW-CPU 6-25
ZCOM-TKN-OBJNAME
common command token 5-4
common response token 5-6
in ZSCP-EVT-BAD-GETVSN 6-30
in ZSCP-EVT-DEAD-DEVICE 6-29
role in message routing 3-3
ZCOM-TKN-OBJSTATE 6-27
ZCOM-TKN-OBJTYPE 5-5, 5-6
ZCOM-TKN-OLD-CPU 6-25
ZCOM-TKN-OLD-OBJSTATE 6-27
ZCOM-TKN-REQID-PAID 3-6, 5-3
in ZSCP-EVT-SECURITY-VIOL 6-28
ZCOM-TKN-REQID-PHANDLE 3-6, 5-3
ZCOM-TKN-REQID-PPROGXFILE 3-6,
5-3
ZCOM-TKN-REQID-PSTRING 3-6, 5-3
ZCOM-TKN-SERV-ERR 4-1
in ZCOM-ERR-SERV-ERR A-9
ZCOM-TKN-STOP-OPT 5-33
ZCOM-TKN-SWITCH-CPU 5-34
ZCOM-TKN-TRACE-BKUP 4-29
ZCOM-TKN-TRACE-OPT 4-29
ZCOM-TKN-XMGR
common command token 5-3
common response token 5-5
in D-series command routing 3-4
in ZSCP-EVT-SECURITY-VIOL 6-28
ZCOM-TNM-TRACE-BKUP 4-29
ZCOM-TNM-TRACE-MODIF 4-29
ZCOM-TNM-TRACE-OPT 4-29
ZCOM-TNM-TRACE-WORK 4-29
ZCOM-VAL-COM-BUF-LEN 4-28
ZCOM-VAL-MAX-COM-BUF-LEN 4-28
ZCOM-VAL-TRACE-FUNC-MODIFY 4-
28
ZCOM-VAL-TRACE-FUNC-START 4-28
ZCOM-VAL-TRACE-FUNC-STOP 4-28
ZCOM-VAL-TRACE-OPT-ALL 4-28
ZNET SCP Process 2-2
ZSCP
data definitions 4-3
errors A-11
events 6-1
maps 4-16
tokens 4-3
values 4-24
ZSCP-DDL-INFO-PROC 4-16
ZSCP-DDL-LISTDEV-PROC 4-17
ZSCP-DDL-LISTOPENS-PROC 4-18
ZSCP-DDL-STATUS-PROC 4-19
ZSCP-DDL-XINFO-PROC 4-20
ZSCP-DDL-XLISTDEV-PROC 4-21
ZSCP-DDL-XLISTOPENS-PROC 4-22
ZSCP-DDL-XSTATUS-PROC 4-23
ZSCP-ERR-BKUP-MODIF-NOT-
ALLOW A-15
ZSCP-ERR-NO-BKUP A-12
ZSCP-ERR-NO-INFO A-13
ZSCP-ERR-OBJ-ACTIVE A-12
ZSCP-ERR-TKN-VAL-REQ A-13
ZSCP-ERR-TRACE-MOD-REQ A-15
ZSCP-EVT-ACB-FULL 6-19
ZSCP-EVT-ALLOCSEGMENT-ERR 6-7
ZSCP-EVT-AWAITIO-ERR 6-9
ZSCP-EVT-BAD-BKP 6-12
ZSCP-EVT-BAD-BUF 6-17
ZSCP-EVT-BAD-CHKPT 6-8
ZSCP-EVT-BAD-GETVSN 6-29
ZSCP-EVT-BAD-QUEUE 6-14
ZSCP-EVT-BAD-REPLY 6-27
ZSCP-EVT-BAD-TABLE 6-10
ZSCP-EVT-BKP-NEWPROCESS-ERR 6-
22
ZSCP-EVT-BKP-OPEN-ERR 6-23
ZSCP-EVT-BKP-SIGNALTIMEOUT-
ERR 6-21
ZSCP-EVT-BKUP-DOWN 6-26