Subsystem Control Point (SCP) Management Programming Manual

Common Definitions
Subsystem Control Point (SCP) Management Programming Manual—520619-001
4-3
ZSCP Definitions
ZSCP Definitions
ZSCP definitions are defined by the SCP subsystem and are unique to it.
ZSCP Tokens
ZSCP-TKN-DEVTYPE
Management applications can include this token in LISTDEV commands to request
information about a specific device type. The token value consists of an integer pair.
The first integer specifies a device type, and the second specifies a device subtype. To
request information about all devices of the type specified by the first integer, regardless
of subtype, set the device subtype to -1.
Table 4-1
lists supported device types and subtypes by device name. Table 4-2 on
page 4-10 lists them by device type and subtype.
token-code ZSCP-TKN-DEVTYPE
value ZSCP-TNM-DEVTYPE
token-type ZSPI-TYP-INT-PAIR.
Table 4-1. Device Types and Subtypes Supported by the LISTDEV Command, by
Name (page 1 of 7)
Device Description Type,Subtype D/G-Series
AM3270 Line from controller
Line from 6100 subsystem
60,0
60,10
D-series
Both
AM6520 Line from controller
Line from 6100 subsystem
59,0
59,10
D-series
any device type
> 63
44 is displayed as the type for any device
with a device type greater than 63. The
program cannot return information on
such device types. Use the newer
Guardian procedures to get information
on such devices.
44,0 Both
APLTALK TandemTalk implementation of
AppleTalk AM protocol
TandemTalk implementation of
AppleTalk Transaction protocol
TandemTalk implementation of
AppleTalk Data Stream protocol
36,0
36,1
36,2
D-series
ATM Network Manager
I/O Process
42,0
42,1
Both
ATP6100 Communications Subsystem Manager for
terminals attached to 6100 subsystem
53,0 Both