Subsystem Control Point (SCP) Management Programming Manual

Common Definitions
Subsystem Control Point (SCP) Management Programming Manual—520619-001
4-10
ZSCP Tokens
Table 4-2. Device Types and Subtypes Supported by the LISTDEV Command, by
Device Type (page 1 of 7)
Type,Subtype Device Description D/G-Series
1,0 Operator
Console
$0 (Operator Process) or alternate
collector
Both
1,1 $0.#ZSPI ($0 opened to receive SPI
commands to $0)
Both
1,2 $Z0 (Compatibility Distributor) Both
1,32 Resident printing distributor Both
3,36 Storage NonStop™ Storage Management
Foundation (SMF) virtual disk process
G-series
3,38 4560 (2 GB formatted capacity) with
3681 MFC 3129 controller
G-series
3,39 4570 (4 GB) with ServerNet DA G-series
3,41 4604 (4 GB) G-series
3,42 4608/4609 (8 GB) G-series
3,43 4618 (18 GB) G-series
3,44 4636/4637 (36 GB) G-series
3,48 4590 (18 GB) with ServerNet/DA G-series
4,6 Magnetic Tape
Unit
5170 tape unit (1600, 6250 bpi)
PMF/IOMF or ServerNet/DA
G-series
4,9 5190 tape unit (18 track, 38000 bpi) or
5194 tape unit (36 track, 38000 bpi) with
PMF/IOMF or ServerNet/DA
G-series
4,11 5142 DAT with PMF/IOMF G-series
6,0 Terminal Conversational mode (PN 6401/6402) or
PATPTERM (non-Compaq) device
Both
6,1 Page mode (PN 6511/6512) Both
6,2 Page mode (PN 6520/6521) Both
6,3 Page mode (PN 6520 remote) ITI
protocol for use by AM6520
D-series
6,4 Page mode (PN 6526/6528/653n) Both
6,5 Page mode (PN 6530 remote) ITI
protocol for use by AM6520
D-series
6,6-6,10 Conversational mode:
6 = 3277 (screen size 12x40)
7 = 3277 (screen size 24x80)
8 = 3277 (screen size 32x80)
9 = 3277 (screen size 43x80)
10 = 3277 (screen size 12x80)
Both