Subsystem Control Point (SCP) Management Programming Manual

Common Definitions
Subsystem Control Point (SCP) Management Programming Manual—520619-001
4-12
ZSCP Tokens
7,50 Isochronous line D-series
7,56 Automatic calling unit (ACU) D-series
8,0 Open SCSI Passthrough G-series
9,0 Process to
Process Interface
X25AM process Both
10,0 Terminal SNAX
Cathode-Ray
Tube (CRT)
Protocol
327x CRT mode interface Both
10,20 3275-11, 3276-1 & -11, 3277-1, 3278-1 Both
10,21 3275-12, 3276-2 & -12, 3277-2, 3278-2,
3178-C10, -C20, -C3, & -C4, 3279-2A,
-2B, -S2A, -S2B, & -02X
Both
10,22 3276-3, 3278-3, 3277-3, 3279-3A, -3B, -
S3G, & -03X
Both
10,23 3276-4 & -14, 3278-4, 3277-4, 6580-
A04, -A06, -A08, & -A10
Both
10,24 3278-5, 3276-5, 3277-5 Both
10,30 3262, 3284, 3286, 3287, 3289 Both
11,40 Bit sync
ENVOY
Synchronous Data Link Control (SDLC) Both
11,41 High-Level Data-Link Control (HDLC) Both
11,42 Advanced Data Communications Control
Procedures (ADCCP)
Both
11,43 Frame protocol Both
12,0 Tandem-to-IBM
Link (TIL)
Both
13,5 SNAX/APC SNASVM (Service Manager Process) Both
13,10 APC Both
13,15 SNAX/HLS Both
14,0 SNAX SAN Application Logical Unit (SNALU) Both
15,0 SAFETNET Safe-T-Net unit Both
15,1 Safe-T-Net manager process $ZKEY Both
15,2 Programmable Safe-T-Net unit SAFE/AP Both
16,0 NFS NFS Management process Both
16,1 NFS LAN Interface process Both
Table 4-2. Device Types and Subtypes Supported by the LISTDEV Command, by
Device Type (page 3 of 7)
Type,Subtype Device Description D/G-Series