Subsystem Control Point (SCP) Management Programming Manual

Common Definitions
Subsystem Control Point (SCP) Management Programming Manual—520619-001
4-14
ZSCP Tokens
40,0 EM3270 SCF PM Both
41,0 IPX/SPX Protocol process Both
42,0 ATM Network Manager Both
42,1 I/O Process Both
43,0 LAN LAN Subsystem Manager Process
(T8173)
Both
43,1 LAN Monitor Process (T8174) Both
43,2 LAN SAC process (T7893) Both
43,3 LAN LIF process (T7933) Both
43,4 LAN PIF process (T7893) Both
44,0 any device type
> 63
44 is displayed as the type for any device
with a device type greater than 63. The
program cannot return information on
such device types. Use the newer
Guardian procedures to get information
on such devices.
Both
45,0 QIO Queue I/O Monitor Process Both
46.0 TELNET TCP/IP TELNET subsystem Both
47,0 SNAX NT2.1 Both
48,0 TCP/IP NonStop Transmission Control
Protocol/Internet Protocol
implementation
Both
49,0 SNAX/CDF $CDF Manager Process Both
50,0 CSM Communications Subsystem Manager for
6100 subsystem
D-series
50,1 Communications Subsystem Manager for
6105 subsystem (single-board 6100)
D-series
50,63 SCP CSM Subsystem Control Point (SCP)
process
Both
51,1 CP6100 BISYNC line Both
51,2 ADCCP line Both
51,3 TINET line D-series
52,0 SMF master SMF master process Both
53,0 ATP6100 Communications Subsystem Manager for
terminals attached to 6100 subsystem
Both
54,0 DDNAM Non-3650 or non-6100 Both
Table 4-2. Device Types and Subtypes Supported by the LISTDEV Command, by
Device Type (page 5 of 7)
Type,Subtype Device Description D/G-Series