Subsystem Control Point (SCP) Management Programming Manual

Subsystem Control Point (SCP) Management Programming Manual—520619-001
5-1
5
Commands and Responses
This section describes the SPI commands supported by SCP processes and includes:
Topic Page
Common Command Tokens 5-2
Common Response Tokens 5-5
Command Security 5-7
Commands and Responses 5-7
Table 5-1. SCP-Supported Commands
Command
(ZCOM-CMD-)
Security
Classification Description Page
ABORT Sensitive Abruptly stops an SCP process in spite of any
current opens.
5-8
ALTER Sensitive Modifies SCP internal processing parameters. 5-9
GETVERSION Nonsensitive Returns SCP process version information. 5-12
INFO Nonsensitive Returns SCP process startup information. 5-15
LISTDEV Nonsensitive Returns information about devices by type and
subtype.
5-18
LISTOPENS Nonsensitive Returns a list of the SCP process openers. 5-21
RESETSTATS Sensitive Returns and resets SCP processing statistics. 5-24
START Sensitive Cancels a STOP command that is in progress. 5-26
STATISTICS Nonsensitive Returns SCP processing statistics. 5-27
STATUS Nonsensitive Returns SCP process status information. 5-29
STOP Sensitive Stops and SCP process. 5-32
SWITCH Sensitive Switches an SCP process to its backup process. 5-34
TRACE Sensitive Starts, modifies, or stops a trace of SCP
processing.
5-35