Subsystem Control Point (SCP) Management Programming Manual

Commands and Responses
Subsystem Control Point (SCP) Management Programming Manual—520619-001
5-14
GETVERSION Command
ZCOM-TKN-GETVSN-SECUR-SUPP
is included in the response to a supplemental GETVERSION command. It indicates
the level of command security that the SCP process expects an intermediate SCP
process to provide. It is always set to:
ZCOM-TKN-GETVSN-TRACE-SUPP
is included in the response to a supplemental GETVERSION command. The SCP
process uses this token to indicate the level of tracing support that it expects an
intermediate SCP process to provide. It is always set to:
ZCOM-TKN-GETVSN-LVL
is included in response to a supplemental GETVERSION command. It declares
SCP’s level of support for specific features of the management interface. SCP
processes report:
ZCOM-TKN-GETVSN-SENS-GRP
is included in response to a supplemental GETVERSION command. It identifies a
user group that is allowed to issue sensitive commands. SCP always returns a value
of 255, indicating that only members of the super group can issue sensitive
commands.
ZCOM-VAL-SECUR-SUPP-ALL The queried SCP process lets an intermediate
routing SCP process (if one is used) enforce
command security.
ZCOM-VAL-SUPP-NONE SCP trace support is disabled for an intermediate SCP
process, which then forwards all TRACE commands to
the queried SCP process without intervention.
ZCOM-VAL-GETVSN-ENLIT The SCP process is capable of processing new tokens
and data structures.