Subsystem Control Point (SCP) Management Programming Manual

Commands and Responses
Subsystem Control Point (SCP) Management Programming Manual—520619-001
5-16
INFO Command
structure and returns the information in ZSCP-MAP-XINFO-PROC and ZCMK-
TKN-PROG-XFNAME.
.ZAUTO-STOP
contains the value of the AUTOSTOP startup parameter.
.ZDEL-DELAY
contains the value of the DELETEDELAY startup parameter.
.ZSEG-PAGES
contains the value of the SEGPAGES startup parameter.
.ZPROG-FNAME
contains the name of the SCP process object file.
ZSCP-MAP-XINFO-PROC
returns SCP process startup parameters in these fields:
.ZAUTO-STOP
contains the value of the AUTOSTOP startup parameter.
.ZDEL-DELAY
contains the value of the DELETEDELAY startup parameter.
.ZSEG-PAGES
contains the value of the SEGPAGES startup parameter.
ZCMK-MAP-INFO
contains information on internal processing conditions in the SCP process.
.ZDEBUG-ON-ERR
reports the current value of the debugging flag that specifies how the process
responds if it detects an internal error. This value is specified in the
DEBUGONERROR startup parameter.
.ZBKUP-DEBUG
reports the current setting of the debugging flag that specifies whether the
backup process starts in debug mode when next initiated. This value is specified
in the BACKUPDEBUG startup parameter.