SWAN 2 Concentrator Installation and Support Guide

Replacing a WAN Backplane Interface Card (BIC)
SWAN 2 Concentrator Installation and Support Guide—429593-010
7-3
Replace the WAN BIC
Replace the WAN BIC
Review Standard Operating Practices
Refer to Standard Operating Practices on page 5-3.
Figure 7-1. WAN BICs
Table 7-2. Replacement Checklist for a WAN BIC
Step Description
1.
Review Standard Operating Practices.
2.
Remove the WAN BIC.
3.
Unpack and Inspect the Replacement WAN BIC.
4.
Install the Replacement WAN BIC.
5.
Verify the Installation of the Replacement WAN BIC.
Note. Whenever you handle a WAN BIC, follow standard operating practices to avoid damage
to the equipment.
WB6
WB5
WB
VST940.vsd
WB
WB
WB
WB
WB
WB4
WB3
WB2
WB1
Line 1 Line 0