SWAN 2 Concentrator Installation and Support Guide

What’s New in This Guide
SWAN 2 Concentrator Installation and Support Guide—429593-010
xii
Changes to the 429593-009 Version
•
Updated these topics for NonStop BladeSystems:
°
SWAN 2 Concentrator Features on page 1-1
°
SWAN 2 Concentrator Connections on page 1-7
°
Plan Your Installation on page 2-2
°
Connect the Ethernet Cables on page 2-11
°
Identify the Correct Ethernet Ports on page 2-13
°
Connect the Ethernet Cables to a Switch, Ethernet Hub, or Router on
page 2-17
•
Added or updated these hardware or firmware topics:
°
Table 2-5, Corrective Action for Abnormal LED States, on page 2-37
°
Update SWAN 2 CLIP Firmware on page 2-39
°
Troubleshooting Firmware Problems on page 4-6
°
Update the CLIP Firmware on page 6-6
Changes to the 429593-009 Version
The battery replacement and firmware update procedures have these important
updates:
•
Clear the Alarm and Verify the Installation of the Replacement Battery on
page 11-5
•
Step 4: Refresh the Status of All SWAN 2 Batteries on page A-4
Changes to the 429593-008 Version
•
This publication has been updated to reflect new product names:
•
This publication might contain both HP and Compaq product names.
•
Product graphic representations are consistent with the current product interface.
HP Encourages Your Comments
HP encourages your comments concerning this document. We are committed to
providing documentation that meets your needs. Send any errors found, suggestions
for improvement, or compliments to [e-mail]. Include the document
title, part number, and any comment, error found, or suggestion for improvement
concerning this document.