SWAN 2 Concentrator Installation and Support Guide

Replacing a Fan
SWAN 2 Concentrator Installation and Support Guide—429593-010
12-6
Install the Replacement Fan
5. Carefully slide the fan all the way into the fan slot. Make sure that you leave at
least 7.5 inches of clearance for servicing between any D-rings and the fan.
6. Tighten the thumbscrew to lock the fan into place. Do not overtighten the
thumbscrew.
7. Disconnect the grounding clip of your ESD wriststrap from the SWAN 2
concentrator rack.
7.5 Inches of
Clearance
Required
VST964.vsd