SWAN 2 Concentrator Installation and Support Guide

SWAN 2 Concentrator Installation and Support Guide—429593-010
xiii
About This Guide
The SWAN 2 Concentrator Installation and Support Guide describes how to install and
maintain a next-generation ServerNet wide area network (SWAN) 2 concentrator and
its components. This guide includes:
•
Introduction to the architecture, components, and features of the SWAN 2
concentrator
•
Step-by-step instructions for installing, removing, replacing, and resuming
operations on a SWAN 2 concentrator
•
Introduction to the hardware components in a SWAN 2 concentrator
•
Step-by-step instructions for installing, removing, replacing, and resuming
operations on the SWAN 2 concentrator components
•
Procedures for diagnosing problems
•
Procedures for updating the SWAN 2 communications line interface processor
(CLIP) firmware
•
A description of the supported electrical signals and the wiring of cables and
connectors provided by HP for use with the SWAN 2 concentrator
Configuring a SWAN 2 concentrator is described in the WAN Subsystem Configuration
and Management Manual.
Who Should Use This Guide
This guide is written for anyone who is responsible for installing or maintaining the
SWAN 2 concentrator and its components.