SWAN 2 Concentrator Installation and Support Guide

Using TSM to Update SWAN 2 CLIP Firmware

SWAN 2 Concentrator Installation and Support Guide—429593-010

B-11

Step 6: Initiate the Firmware Update Using TSM

1. Log on to the TSM Service Application.

2. Select Display> Firmware update.

The Firmware Update dialog box appears.

3. From the Resource Type list, select SWAN Clip.

4. From the Display list, select All.

The SWAN 2 CLIPs are listed in the Available box:

5. Select all SWAN CLIPs with a current file version that does not match the

T7953AAO version (T7954Vnn^ddmmmyyyy^AAO). .

6. Click Add to move the CLIPs to the Selected box.

7. Click Specify other.

The Specify Firmware File Location dialog box appears.

Caution. If you are updating from a pre-T7953AAG firmware version, you must perform a

firmware update for all CLIPs on each SWAN concentrator. The firmware update should be

performed in parallel for a maximum of six SWAN CLIPs for each NonStop TCP/IP pair.

VST425.vsd