SWAN 2 Concentrator Installation and Support Guide

Introduction to the SWAN 2 Concentrator
SWAN 2 Concentrator Installation and Support Guide—429593-010
1-9
Ethernet Ports on a SWAN 2 Concentrator
Ethernet Ports on a SWAN 2 Concentrator
This figure shows how the SWAN 2 concentrator connects to the G4SA’s Ethernet
ports on the Integrity NonStop NS-series server through the concentrator’s two 10/100
Base-T Ethernet ports. A G4SA in a BladeSystem IOAM enclosure would connect to
the SWAN 2 concentrator in the same way.
The Ethernet switches or hubs in this figure are part of a private Ethernet LAN that
transports frames between the SWAN 2 concentrator and the Integrity
NonStop NS-series server. The WAN subsystem currently supports only private or
local Ethernet segments. HP does not recommend using a SWAN 2 concentrator on a
public network for security reasons. Also, isolate the SWAN 2 concentrator from other
network traffic.
Ethernet Ports
G4SAs
NonStop NS-Series System
G4SA
G4SA Ethernet Ports
G4SA
1
0
/
1
0
0
B
a
s
e
T
E
t
h
e
r
n
e
t
S
w
i
t
c
h
o
r
H
u
b
VST880.vsd
SWAN 2 Concentrator Back Panel
To Ethernet Port B
on the SWAN 2 Concentrator
To Ethernet
Port A