SWAN 2 Concentrator Installation and Support Guide

SWAN 2 Concentrator Installation and Support Guide—429593-010
2-21
Install the Cable Management Kit
2 Installing a SWAN 2 Concentrator
Install the Cable Management Kit
1. Locate the cable management kit included in the SWAN 2 concentrator shipping
container. The following figure shows the contents of the cable management kit.
2. If you are using a rack that has a 24-inch depth, the cable management kit should
be mounted externally on the rack for optimal cooling and ease of component
removal with minimal cable reroute.
If you are using a rack that has a 30 or 36-inch depth, the cable management kit
can be mounted internally on the rack allowing the rear rack door to be closed.
D-ring
Universal Mounting
Bracket
M5 Screw
Universal Mounting
Clip
VST951.vsd