SWAN 2 Concentrator Installation and Support Guide

SWAN 2 Concentrator Installation and Support Guide—429593-010
2-38
Power On the SWAN 2 Concentrator and Run the
Power-On Self-Test (POST)
Fan Amber fault LED is lit.
1. Review Section 5, Servicing
SWAN 2 Concentrator
Components.
2. Unseat the fan.
3. Reseat the fan.
4. Recheck the fault LED.
5. If the fault LED remains lit, refer to
View Alarms Using OSM or TSM
on
page 4-2.
6. If the fan is not rotating, replace the
fan.
Power supply Amber fault LED is lit.
1. Review Section 5, Servicing
SWAN 2 Concentrator
Components.
2. Unseat the power supply.
3. Reseat the power supply.
4. Recheck the fault LED.
5. If the fault LED remains lit, refer to
View Alarms Using OSM or TSM
on
page 4-2.
Battery Amber fault LED is lit.
1. Review Section 5, Servicing
SWAN 2 Concentrator
Components.
2. Unseat the battery.
3. Reseat the battery.
4. Recheck the fault LED.
5. If the fault LED remains lit, refer to:
View Alarms Using OSM or TSM
on
page 4-2
-or-
Clear the Alarm and Verify the
Installation of the Replacement
Battery on page 11-5.
Table 2-5. Corrective Action for Abnormal LED States (page 2 of 2)
Location LED State Corrective Action