SWAN 2 Concentrator Installation and Support Guide

Diagnosing Problems
SWAN 2 Concentrator Installation and Support Guide—429593-010
4-2
Diagnostic Actions in OSM and TSM
For more information about the ALTER TASK command, see the WAN Subsystem
Configuration and Management Manual.
Diagnostic Actions in OSM and TSM
View Alarms Using OSM or TSM
Use the OSM Service Connection or the TSM Service Application (G06.21 and earlier
RVUs only) to check for alarms and to view alarm details such as suggested repair
actions.
1. In the tree pane, expand the SWAN Collection object to look for alarms
(bell-shaped icons) or red or yellow symbols, which indicate that subcomponents of
the object have either alarms or problem attributes.
2. Get information about the alarms
SNAX/APN
SNAX/XF
WANADCCP ADCCP DLC C8169Q00
SNAX/APN
SNAX/XF
WANSNAX SNAX/APN and
SNAX/XF DLC
C8168Q00
TR3271 WAN 3271 Bisync DLC C0040Q00
X25AM WANX25LAPB X.25 LAPB DLC C1096Q00
Table 4-1. Checklist for Diagnosing SWAN 2 Concentrator Problems
Step TSM Action
1. View Alarms Using OSM or TSM
.
2. Execute the Verify Logical Configuration Action
.
3. Execute a Loopback Test
.
4. Execute SWAN 2 CLIP Test Actions
.
Device Object DLC Task Description
File Name
$SYSTEM.CSSnn (page 2 of 2)