SWAN 2 Concentrator Installation and Support Guide

Diagnosing Problems
SWAN 2 Concentrator Installation and Support Guide—429593-010
4-7
What to Do if OSM Fails to Update a CLIP
a. If the CLIP is still in a Started state, use the SCF STATUS SERVER command
to verify status of the CLIP. For example:
13> SCF STATUS SERVER $ZZWAN.#SWAN2.1*
b. Enter the SCF STOP command similar to the following to stop the SWAN
adapter object:
3> SCF STOP ADAPTER $ZZWAN.#SWAN2.1, SUB ALL
c. Use the SCF STATUS SERVER command again to make sure that the SWAN
adapter object is stopped.
6. From the Available Actions list, select Firmware Update to update the firmware for
that particular CLIP.
7. Click Perform action.
8. Monitor the progress in the Action Status menu. To view details of the action, click
Details.
9. To start the individual CLIP, select Start from the Available Actions list and click
Perform action.
10. Monitor the start progress in the Action Status menu. To view details of the action,
click Details.