SWAN 2 Concentrator Installation and Support Guide

Contents
SWAN 2 Concentrator Installation and Support Guide—429593-010
vii
B. Using TSM to Update SWAN 2 CLIP Firmware
(continued)
B. Using TSM to Update SWAN 2 CLIP Firmware (continued)
Step 9: Verify That the SWAN 2 CLIPs Are Running the Latest Firmware B-13
Step 10: Start Stopped Lines (If Necessary) B-13
C. Cable Specifications
Ethernet (RJ-45) Connector Signal Descriptions C-1
Supported WAN Signals C-2
Supported RS-232 Signals C-3
Supported RS-449 Signals C-5
Supported X.21 Signals C-7
Supported V.35 Signals C-9
Unsupported WAN Signals C-12
Interface Converter Cable Wiring C-13
RS-232 Interface Converter Cable Wiring C-16
RS-449 Interface Converter Cable Wiring C-17
X.21 Interface Converter Cable Wiring C-18
V.35 Interface Converter Cable Wiring C-19
Loopback Test Connector Wiring C-20
Interface Select (ISEL) Code C-21
D. Connecting a Current Loop Device
Current Loop Converter D-2
Current Loop Adapter Pinouts D-2
Safety and Compliance
Glossary
Index
Examples
Example 1-1. Allocating More Memory for WANMGR 1-7
Example 3-1. Sample X25AM Subsystem SCF ABORT LINE Command 3-2
Example 3-2. Sample SCF STOP ADAPTER Command 3-2
Example 3-3. Sample SCF ALTER ADAPTER Command to Alter Track-ID 3-2
Example 3-4. Sample SCF START ADAPTER Command 3-6
Example 3-5. Sample SCF START DEVICE Command 3-6
Example 3-6. Sample SCF START LINE Command 3-7
Example 4-1. Stopping WAN Lines 4-5
Example 4-2. Stopping DLC TASK Objects 4-5