SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Installing and Using the SWAN Tools
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
5-34
WANLNCK Command Example
PATH Info : Path A Path B
PATH State : Started Started
TCP/IP process : $ZTC1 $ZTC2
TCP PROC State : Started Started
TCPIP Pri CPU : 0 1
TCPIP BkUp CPU : 1 0
SUBNET Name : #SN1 #SN1
SUBNET IP Addr : 192.168.10.2 192.168.11.2
SUBNET State : Started Started
SLSA LIF Name : $ZZLAN.LAN01 $ZZLAN.LAN02
Host IP Address: 192.168.10.2 192.168.11.2
PATH IP Address: 192.168.10.192 192.168.11.192
Last BOOTP Time: 7/29/1999 at 12:54:15.447 7/29/1999 at 12:53:50.594
WANBoots : PATH A PATH B
WANMgr Obj Name: $ZZWAN.#ZZBP1 $ZZWAN.#ZZBP2
Process Name : $ZZBP1 $ZZBP2
State : Started Started
IOPObject File : $SYSTEM.SYS01.WANBOOT $SYSTEM.SYS01.WANBOOT
Preferred CPU : 0 0
Alternate CPU : 1 1
(Type, Subtype): (0,30) (0,30)
Startup String : TCPIP $ZTC1 TCPIP $ZTC2
TFTPSRVs : PATH A PATH B
WANMgr Obj Name: $ZZWAN.#ZTF1 $ZZWAN.#ZTF2
Process Name : $ZTF1 $ZTF2
State : Started Started
IOPObject File : $SYSTEM.ZTCPIP.TFTPSRV $SYSTEM.ZTCPIP.TFTPSRV
Preferred CPU : 0 1
Alternate CPU : 1 -1
(Type, Subtype): (0,0) (0,0)
TCPIP Process : $ZTC1 $ZTC2
Startup String : $SYSTEM.CSS01 $SYSTEM.CSS01
SNMPTMUXs : PATH A PATH B