SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Troubleshooting Tips for the SWAN Concentrator
and the WAN Subsystem
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
6-4
CLIP Dump Detection and Recovery
This example shows the BOOTP EMS message indicating CLIP dump initiation
(G06.07 Software Product Revisions (SPRs) and later RVUs).
This example shows a TRAPMUX EMS message with specific Trap number 1245195
(the details on the cause of the dump is minimal).
This example shows an EMS message indicating completion of a CLIP dump.
WANBoot:
BOOTP received for SWAN06 TRACKID X017NP,
CLIP 1, IP Address 192.168.12.182, Path A
VPROC: T7954G01^21OCT1999^AAF^R002,
Dump in Progress
Enterprise
Specific Trap - SNMP-Trap-Multiplexer
$ZTM2, Version: 0, Community:
HP_Computers_EMS, Enterprise:
1.3.6.1.4.1.169.7.1, Network addr:
192.168.12.182, Generic trap: 6, Specific
trap: 1245195, Time ticks: 0, (varbind 1
OID=1.3.6.1.4.1.169.7.1.7,
type=OCTET-STRING,
value=TRACK X017NP CLIP 3 TASK SMT , BUS
ERR: Error = C008 ; PC = 650C9A ;
FAULT ADDR:206E0020 ; DLC Addr: 64035C
;64035C ; Task: DLC0)
WANBoot: Dump
received for SWAN06, TRACKID X017NP, CLIP
3, IP Address 192.168.12.182, PATH A,
using file
\IDC12.$SYSTEM.ZWANDUMP.D0611000