SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Troubleshooting Tips for the SWAN Concentrator
and the WAN Subsystem
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
6-8
Checking CLIP Accessibility
This example shows the SCF STATUS SERVER command with the DETAIL option
showing CLIP VPROC (G06.07 SPRs and later RVUs).
Checking CLIP Accessibility
You can execute the SCF STATUS TASK command to check if the CLIP is currently
accessible.
Example 1: SCF STATUS TASK $ZZWAN.#SWAN00.1.DIAG indicating CLIP is
accessible (successful on either of the PATHs).
Example 2: SCF STATUS TASK $ZZWAN.#SWAN00.1.DIAG indicating CLIP is
inaccessible.
(failed on both the PATHs)
For G06.07 SPRs and later RVUs, EMS messages are displayed in case of a failure of
CLIP accessibility on either PATH or both PATHs. No EMS message is issued if the
first PATH (PATH A) accessed was successful.
WAN Manager STATUS SERVER for CLIP \IDC14.$ZZWAN.#SWAN00.1
State :......... STARTED
Path A..........: CONFIGURED
Path B..........: CONFIGURED
Number of lines. 2
Line............ 0 : $BSC
Line............ 1 : FREE
Clip VPROC........ T7954G01^21OCT1999^AAF^R002
PATH A DETAILS :
Last BOOTP Time :18 Oct 2003, 23:16:40.300
Status :......... UP
Status changed at:18 Oct 2003, 23:19:06.018
PATH B DETAILS :
Last BOOTP Time :15 Oct 2003, 15:31:27.727
Status :..........DOWN
Status changed at:Path not UP since last BOOTP
WAN Manager STATUS TASK for TASK
\IDC14.$ZZWAN.#SWAN00.1.DIAG
State :........... STOPPED
WAN E00011 Error returned from $ZZWAN.#ZZW01 : 000001006,
Clip is inaccessible from either Path.