SWAN Concentrator and WAN Subsystem Troubleshooting Guide

About This Guide
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
xi
Related Manuals
Related Manuals
Depending on the tasks you are performing, you might require these manuals:
•
SWAN Concentrator Installation and Support Guide
•
SWAN 2 Concentrator Installation and Support Guide
•
TCP/IP Configuration and Management Manual
•
TCP/IP (Parallel Library) Configuration and Management Manual
•
TCP/IPv6 Configuration and Management Manual
•
WAN Subsystem Configuration and Management Manual
To configure one or more SWAN concentrators, you can use a configuration tool called
WAN Wizard Pro.
WAN Wizard Pro
WAN Wizard Pro is a graphical user interface (GUI) that guides you step-by-step
through the configuration process of one or more SWAN concentrators. It is an efficient
alternative to using multiple Subsystem Control Facility (SCF) commands.
Depending on your RVU, you gain access to WAN Wizard Pro through the taskbar on
your system console by using one of these methods:
•
For G06.21 RVU and later RVUs and H06.03 and later RVUs:
Start>Programs>HP WAN Wizard Pro>WAN Wizard Pro
•
For G06.20 RVU and earlier RVUs:
Start>Programs>Compaq TSM>Guided Configuration Tools>WAN Wizard Pro
Configuring Data Communications Subsystems
The WAN subsystem configures and manages both wide area network (WAN) and
local area network (LAN) connectivity for the following communications subsystems:
•
AM3270
•
ATP6100
•
CP6100
•
Envoy
•
EnvoyACP/XF
•
Expand
•
SNAX/APN
•
SNAX/XF
•
TR3271
•
X25AM