SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Error and Informational Messages With Recovery
Actions
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
7-7
PATH and SNMP Error Messages
PATH and SNMP Error Messages
The messages in this section indicate PATH errors and SNMP download errors. The
messages indicate the error messages and LFD messages.
1514
A PATH has been marked DOWN by the LFD feature.
Message
Recovery
1. Check the PATH status. Correct any physical PATH problems detected.
2. The CLIP could be taking a dump or a FIRMUP could be in progress (you may
want to wait briefly). If the PATH status continues to be down (“NO Path Up
message”), check the physical PATH and/or the CLIP accessibility.
Versions: Applicable for SWAN G06.06 and previous RVUs only.
1513
A PATH has been marked UP by the LFD feature.
Message
Recovery
None. This is an informational message that the PATH has come up.
Versions: Applicable for SWAN for G06.06 and previous RVUs only.
WANBoot:PATH A DOWN for SWAN25,
CLIP 2
TRACKID SWAN28,
IP Address 192.168.10.197
Last BOOTP Time: bootp-time
Path UP Since : path-up-since
Path DOWN Since : path-down-since
WANBoot:PATH A UP for SWAN06,
CLIP 3
TRACKID X017NP,
IP Address 192.168.12.182
Last BOOTP Time : bootp-time
Path DOWN Since : path-down-since
Path UP Since : path-up-since