SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Error and Informational Messages With Recovery

Actions

SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008

7-24

Error Messages

The FIRMUP error messages are as follows:

1508

No BOOTP request from CLIP.

Message

Recovery

During the Initial BOOTP step the WANBoot request for a BOOTP request from the

CLIP did not succeed. Possible causes are physical PATH errors and absence of the

SWAN concentrator on the network. Correct the problem, then retry.

1508

TCPIP process error.

Message

Recovery

The WANBoot process could not request the CLIP for a BOOTP request due to a

TCP/IP process error. In this case, the error 4128 indicates that the SUBNET is

stopped or not configured. Correct the problem, then retry the FIRMUP procedure.

WANBoot:

FIRMUP status for $ZZWAN.#SWAN00.1,

TRACKID X017R3, using file

\IDC14.$SYSTEM.CSS00.C7953P00

Status : FAILED

Step : Initial BOOTP

Reason : No BOOTP request from CLIP