SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Error and Informational Messages With Recovery
Actions
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
7-25
Error Messages
1508
No trap response from CLIP.
Message
Recovery
ConMgr returned the error “No Trap Resp from CLIP.”
The initial request for starting the LINE/DIAG task has been acknowledged by the CLIP
but the subsequent confirmation has not been sent by the CLIP:
•
If theT7953AAG version of the SWAN firmware is currently running, the TFTP
server process on the host is not configured/stopped or is sending an error. Restart
the TFTP server process to correct the problem. If the problem persists, contact
your HP service provider.
•
The CLIP may have stopped responding due to software problems or PATH errors.
You may need to wait for a period of time or correct the physical PATH errors
detected. If the problem persists, contact your HP service provider.
1508
No BOOTP request from CLIP.
Message
WANBoot:
FIRMUP status for $ZZWAN.#SWAN00.1,
TRACKID X017R3, using file
\IDC14.$SYSTEM.CSS00.C7953P00
Status : FAILED
Step : Initial Add Task
Path A : No Trap Resp from CLIP
Path B : Not Configured
WANBoot:
FIRMUP status for $ZZWAN.#SWAN00.1,
TRACKID X017R3, using file
\IDC14.$SYSTEM.CSS00.C7953P00
Status : FAILED
Step : Final BOOTP
Reason : No BOOTP Request from CLIP