SWAN Concentrator and WAN Subsystem Troubleshooting Guide

SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
A-1
A Examples
•
Determining the SWAN Concentrator Used by a Communications Line on page A-2
•
Determining the WAN Subsystem IOPs That Use a SWAN Concentrator on
page A-3
•
Determining the Location of a WAN Subsystem Device on page A-4
•
Displaying Modifiers for a WAN Subsystem Device on page A-5
•
Displaying Modifiers for a Communications Line on page A-6
•
Determining the TCP/IP Processes and IP Addresses for a SWAN Concentrator on
page A-7
•
Determining the TCP/IP Process and IP Address for a LIF on page A-8
•
Determining the LIFs Used by a SWAN Concentrator on page A-9
•
Determining the LIFs and PIFs for an Adapter on page A-10
•
Identifying the LAN Adapters on a System on page A-11
•
Determining the LAN Adapters Used by a SWAN Concentrator on page A-12
•
Determining the Location of a LAN Adapter on page A-13
•
Displaying Information for a WAN Subsystem Process on page A-14
•
Verifying That the TFTP Server Process is Started on page A-15
•
Verifying That the WANBoot Process is Started on page A-16
•
Verifying That the SNMP Trap Multiplexer Process is Started on page A-17
•
Verifying That the WAN Manager Process is Started on page A-18
•
Verifying That the LAN Manager Process is Started on page A-19
•
Verifying That the ADAPTER Object for a LAN Adapter is Started on page A-20
•
Verifying That the SACs for a LAN Adapter Are Started on page A-21
•
Verifying That a PIF is Started on page A-22
•
Verifying That a LIF is Started on page A-23
•
Verifying That a TCP/IP Process is Started on page A-24
•
Verifying That a TCP/IP SUBNET is Started on page A-25
•
Verifying That a TCP/IP Route is Started on page A-26
•
Verifying That the WAN Subsystem Processes Are Started on page A-27
•
Verifying That a WAN Subsystem Device is Started on page A-28