SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Examples
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
A-7
Determining the TCP/IP Processes and IP
Addresses for a SWAN Concentrator
Determining the TCP/IP Processes and IP
Addresses for a SWAN Concentrator
This is an example of the SCF INFO ADAPTER command:
-> INFO ADAPTER $ZZWAN.#S01
WAN MANAGER Detailed Info Adapter \MYSYS.$ZZWAN.#S01
*TrackId.......... ZWXFF *TCPIP Name...... $ZB019
*ALTTCPIP Name.... $ZB01D Concentrator Type. SYNC
KERNELCODE........ $SYSTEM.CSS00.C7953P00
*SNMPCODE......... $SYSTEM.CSS00.C7849P00
*HOSTIP Address... 172.16.35.16 GATEWAYIP Addr
*ALTHOSTIP Address 172.16.45.16 ALTGATEWAYIP Addr
SUBNETMASK........ %HFFFFFF00
ALTSUBNETMASK..... %HFFFFFF00
A ServerNet wide area network (SWAN) concentrator uses two TCP/IP processes and
two Internet Protocol (IP) addresses. The preferred TCP/IP process used by the
SWAN concentrator is shown in the TCPIP Name field and its associated IP address is
shown in the HOSTIP Address field. The alternate TCP/IP process used by the SWAN
concentrator is shown in the ALTTCPIP Name field, and its associated IP address is
shown in the ALTHOSTIP Address field.
In this example, the SWAN concentrator named S01 uses the preferred TCP/IP
process $ZB019, the preferred IP address 172.16.35.16, the alternate TCP/IP process
$ZB01D, and the alternate IP address 172.16.45.16. Note that the preferred and
alternate IP addresses are on different subnets.
SNMPCODE is an optional attribute of SWAN ADAPTER and need not be specified for
SWAN 2.