SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Examples

SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008

A-10

Determining the LIFs and PIFs for an Adapter

This is an example of the SCF INFO LIF command:

INFO LIF $ZZLAN.*

-> SLSA Info LIF

Associated

Name Object MAC Address Type

$ZZLAN.L11123A G11123.0.A 08:00:8E:00:97:B0 Ethernet

$ZZLAN.L11123B G11123.0.B 08:00:8E:00:97:B0 Ethernet

$ZZLAN.L11123C G11123.0.C 08:00:8E:00:97:B0 Ethernet

$ZZLAN.L11123D G11123.0.D 08:00:8E:00:97:B0 Ethernet

Logical interface (LIF) names are shown in the Name column and physical interface

(PIF) names are shown in the Associated Object column. The name of the adapter is

the first part of the PIF name (for example, G11123).

The PIF name indicates the physical port on the adapter. For example, the PIF named

G11123.0.A. identifies port A on the G4SA named G11123, and the PIF named

G11123.0.B identifies port B, and the PIF named G11123.0.C identifies port C, and

G11123.0.D identifies port D. In this example, the LIFs associated with the G4SA

named G11123 are named L11123A, L11123B, L11123C, and L11123D.