SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Examples
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
A-14
Displaying Information for a WAN Subsystem
Process
Displaying Information for a WAN Subsystem
Process
This is an example of an SCF INFO PROCESS command:
->INFO PROCESS $ZZWAN.#*
WAN MANAGER Detailed Info Process \MYSYS.$ZZWAN.#0
RecSize.......... 0 *Type ........... (50,00)
Preferred CPU.... 0 Alternate CPU.... N/A
*IOPOBJECT....... $SYSTEM.SYS01.CONMGR
WAN MANAGER Detailed Info Process \IDC8.$ZZWAN.#ZTXAF
RecSize.......... 0 *Type ........... ( 0,49)
Preferred CPU.... 0 Alternate CPU.... 1
HOSTIP Address... 192.168.011.010
*IOPOBJECT....... \IDC8.$SYSTEM.SYS03.SNMPTMUX
TCPIP Name........ $ZTC7
WAN MANAGER Detailed Info Process \IDC8.$ZZWAN.#ZWBAF
RecSize.......... 0 *Type ........... ( 0,30)
Preferred CPU.... 0 Alternate CPU.... 1
HOSTIP Address... 192.168.010.010
*IOPOBJECT....... \IDC8.$NFS.KKWBT.WANBOOT
STARTUP String... TCPIP $ZTC1
WAN MANAGER Detailed Info Process \IDC8.$ZZWAN.#ZTFAF
RecSize.......... 0 *Type ........... ( 0,48)
Preferred CPU.... 0 Alternate CPU.... 1
HOSTIP Address... 192.168.011.010
*IOPOBJECT....... \IDC8.$SYSTEM.ZTCPIP.TFTPSRV
TCPIP Name ...... $ZTC7
STARTUP String... $SYSTEM.CSS03
This information should help you interpret the command display:
•
A ConMgr process is identified by CONMGR in the IOPOBJECT field.
•
A WANBoot process is identified by WANBOOT in the IOPOBJECT field. The
TCP/IP process with which a WANBoot process is associated is shown in the
STARTUP String field.
•
An SNMP trap multiplexer process is identified by SNMPTMUX in the IOPOBJECT
field. The TCP/IP process used by the SNMP trap multiplexer process is shown in
the TCPIP Name field.
•
A TFTP server process is identified by TFTPSRV in the IOPOBJECT field.
°
The TCP/IP process with which a TFTP server process is associated is shown
in the TCPIP Name field.
°
The STARTUP String field specifies the location of download files.
°
The processor where a WAN subsystem process is configured to run is shown
in the Preferred CPU field