SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Index
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
Index-4
S
QUEST2 (continued)
TASKLONG 5-25
TASKSHORT 5-26
TRAIL 5-27
S
slot 2-14
SNAX/APN subsystem 2-12
SNAX/XF subsystem 2-12
SNMP agent processes, naming convention
for 2-18
SNMP trap multiplexer processes, naming
convention for 2-18
START ADAPTER command 2-7, 3-4/3-5,
4-5, 4-8
START DEVICE command 3-5
START LIF command 3-4, 4-5
START PATH command 2-8
START PROCESS command 3-4/3-5
START ROUTE command 3-5, 4-6
START SERVER command 4-19
START SUBNET command 3-4, 4-6
STATUS ADAPTER command 2-7/2-8,
3-2/3-3, 3-7, 4-4, 4-7, 4-19
STATUS DEVICE command 3-3
STATUS LIF command 3-2, 4-5
STATUS PATH command 2-8
STATUS PIF command 3-2, 4-5
STATUS PROCESS command 3-1, 3-3,
3-7
, 4-5
STATUS ROUTE command 3-2, 4-6
STATUS SAC command 3-2, 4-5
STATUS SUBNET command 3-2, 4-6
STOP ADAPTER command 2-6/2-7, 4-8
STOP PATH command 2-8
Subnets
definition of -xvi
notation convention for -xvi
SWAN
CLIP dump 5-1
tools 5-1
SWAN concentrator
correcting a WAN subsystem
process 2-9
correcting configuration errors 2-5
correcting the Ethernet adapter
configuration 2-5
correcting the IP address 2-8
correcting the TCP/IP process
configuration 2-7
naming convention for 2-13
verifying a SWAN configuration 2-1
SWAN concentrator cabling 4-10
SWAN concentrator, naming
convention 2-18
SWAN hardware
correcting problems 4-3
executing a test action 4-2
verifying 4-2
SWAN tools 5-1
SWAN2
CLIP dump 5-1
tools 5-1
SWT error dumps 5-9
T
TCP/IP process
naming convention for 2-13
naming convention for (G-Series) 2-15
naming convention for (H-Series) 2-17
TCP/IP subsystem 2-12
TELSERV process
naming convention for (G-Series) 2-15
naming convention for (H-Series) 2-17
TR3271 subsystem 2-12
Tracing, communications line 1-4
Troubleshooting tips 6-1
checking CLIP accessibility 6-8
configuring the correct track-id 6-13
finding the current path status 6-11
finding the MAC address 6-10