SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Verifying the SWAN Configuration

SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008

2-13

HP Manufacturing Naming Conventions (G06.26 and

Earlier RVUs)

HP Manufacturing Naming Conventions

(G06.26 and Earlier RVUs)

For G06.26 and earlier RVUs, HP manufacturing uses a naming convention for

processes and devices that relates logical names to the physical location of devices.

This information is also included in the $SYSTEM.ZSYSCONF.SCF0000 file.

cabid

is the two-digit number that identifies the enclosure.

Table 2-2. Naming Convention for WAN Subsystem, SWAN Concentrator,

Related Processes, Devices, and Adapters (G06.26 and Earlier RVUs)

Process or Device Type Convention Example

Disk drives $Dcabid-slot $D3217

Tape drives $Tcabid-slot $T0150

Logical interface (LIF) $ZZLAN.Lcabid-portid $ZZLAN.L018

LAN adapters (E4SA, FESA,

GESA, G4SA, CCSA, or TRSA)

$ZZLAN.Ecabid-slot

For G4SAs, see G4SA Naming

Conventions (G06.24, G06.25,

and G06.26 RVUs) on

page 2-15.

$ZZLAN.E0153

NonStop TCP/IP process $ZBcabid-portid $ZB018

Telnet processes $ZNcabid-portid $ZN018

Listner processes $ZPcabid-portid $ZP018

TFTP server processes $ZTFmn $ZTFAC

WANBoot processes $ZWBmn $ZWBac

SNMP trap multiplexer processes $ZTXmn $ZTXAC

SNMP agent processes $ZTMXA, $ZTMXB, and so on $ZTMXA

SWAN or SWAN 2 concentrator Sconcnum S01

cabid Description Range of Values

0n The object is in processor enclosure n.01-08

n1 The object is in I/O enclosure 1

attached to processor enclosure n.

11, 21, 31, 41, 51, 61, 71, or

n2 The object is in I/O enclosure 2

attached to processor enclosure n.

12, 22, 32, 42, 52, 62, 72, or

n3 The object is in I/O enclosure 3

attached to processor enclosure n.

13, 23, 33, 43, 53, 63, 73, or