SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Verifying the SWAN Configuration
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
2-15
G4SA Naming Conventions (G06.24, G06.25, and
G06.26 RVUs)
G4SA Naming Conventions (G06.24, G06.25, and G06.26 RVUs)
Process or Device Type Convention Example
LIF object Lcabid-module-portid $ZZLAN.L112A
G4SA ADAPTER object Ggroup-module-slot
A G4SA must be installed in an I/O
adapter module (IOAM) enclosure.
$ZZLAN.G1123
Processor multifunction
(PMF) or I/O multifunction
(IOMF) CRU
$ZZLAN.MIOEprocessorid $ZZLAN.MIOE1
TCP/IP process $ZBprocessor cabid-IOAM
position 1-5 + module-portid
Considerations:
•
$ZB is reserved in the HP NonStop
operating system for the NonStop
TCP/IP process
•
Every IOAM group contains two
modules. Twenty G4SA ports are
available for each module, and forty
G4SA ports are available for each
IOAM group. The TCP/IP naming
convention is limited to six
characters: the three initial
characters are reserved ($ZB) and
the final three characters must
include:
processor cabid-IOAM
position 1-5 + module-portid
•
portid can be any letter from A to
U; these letters can be repeated for
modules 2 and 3.
$ZB1AA
TELSERV process $ZN (plus the last three characters of the
NonStop TCPIP process name)
$ZN1AA
LISTNER process $ZP (plus the last three characters of the
NonStop TCPIP process name)
$ZP1AA