SWAN Concentrator and WAN Subsystem Troubleshooting Guide

Verifying the SWAN Configuration
SWAN Concentrator and WAN Subsystem Troubleshooting Guide—426992-008
2-17
HP Manufacturing Naming Conventions (for G06.27
and Later RVUs and H06.03 and Later RVUs and
portid
is the combination of the slot number and port number mapped in this way for
G4SA; this convention uses alphabetical letters A through U:
In the above table, G is the portid for Port C of the G4SA installed in slot 2 of an
IOAM.
concnum
is the incremental number of the SWAN concentrator. For example, the first SWAN
concentrator would be 01, the second SWAN concentrator would be 02, and so on.
HP Manufacturing Naming Conventions (for
G06.27 and Later RVUs and H06.03 and Later
RVUs and J06.03 and Later RVUs)
For G06.27 and later RVUs, H06.03 and later RVUs, and J06.03 and later RVUs, HP
manufacturing uses a naming convention for processes and devices that relates logical
names to the physical location of devices. This information is also included in the
$SYSTEM.ZSYSCONF.SCF0000 file.
Slot 1Slot 2Slot 3Slot 4Slot 5Port Number
AEI MRA
BFJ NSB
CGKPTC
DHL QUD
Table 2-3. Naming Convention for the WAN Subsystem, SWAN Concentrator, and
Related Processes, Devices, and Adapters (G06.27 and Later RVUs, H06.03 and
Later RVUs, and J06.03 and Later RVUs) (page 1 of 2)
Process or Device Type Convention Example
Fibre Channel disk drive $FCnumber $FC10
Tape drives $TAPEnumber $TAPE01
G4SA adapter object Ggroup-module-slot $ZZLAN.G11123
G4SA LIF object Lgroup-module-slot-PIF $ZZLAN.L11123A
TCP/IP process $ZTCnumber $ZTC0 is the first
TCP6SAM process
for the system
TELSERV process $ZTNnumber $ZTN0 is the first
Telserv process for
the system